How to Repair a uPVC Window Frame
uPVC windows are long-lasting and can last for a long time. However, over time they may be damaged.
This damage can affect performance of the window. Fortunately, a lot of these issues can be addressed. This can help you save money on new windows and enhance the comfort of your home. The most frequent issues are:
Cracks
uPVC is a well-known material for window frames because it's long-lasting and energy efficient, but it can suffer from cracking over time. A cracked window is more than just an eye-sore. window repair can also let cold air in your home and increase your electricity bills because heat escapes through the crack. It is possible to repair a uPVC frame without spending a lot of money and you can do it quite quickly.
Identifying the cause of a crack is the first step. It could be caused by a sudden shift in pressure, such as when you open or close the window. This type of crack is referred to as a 'pressure crack' and is typically located near the edges of the window. It is essential to fix the crack as soon you notice it as it could lead to water leakage and draughts.
Another reason for a crack in your uPVC window is when the frame or sill has become out of alignment. This can be caused by moving furniture or settling in the property, and can even be the result of extreme weather conditions such as freezing temperatures. It's simple to address this issue by drilling a few pilot holes and then running a line of silicone across the gap, which will stop any moisture from getting into the window.
To keep your uPVC window frames looking nice and working correctly, you must clean them frequently. This should include wiping down the frames using a white cloth that has been submerged in soapy or solvent water. Make sure to pay special attention to the corners of the frame where dirt is likely to accumulate. It is also recommended to use a scraper Stanley knife to remove any beading that is stuck to the frame.
You should also grease your uPVC window's hinges and rollers to prevent them from rattling whenever you open or shut the window. WD-40 is a great oil that is available in most hardware stores. It is essential that you wash the WD-40 off afterwards, though it could scratch the surface of your uPVC window.
Draughts
Draughts are among the most common issues that people face. These gaps allow cold air to enter the windows, leading to higher heating bills and reduced comfort. Upvc windows typically have efficient seals against drafts, but with time, they can be damaged or deteriorated. You can easily fix a gap by using self-adhesive seals or replacing your window.
To ensure that uPVC windows last for as long as they are able to be, it is essential to maintain them. To get rid of dirt, wipe them down with a damp cloth. Don't use a cloth with dyes since this could stain the window frame. Also, make sure you don't clean the uPVC windows in direct sunlight, or they'll have streaky finishes.
You can also lubricate the hinges of a uPVC window if they're rigid or are moving slowly to prevent them from becoming disaligned. This will help the window open and close smoothly and eliminate any drafts. Lubricants can be purchased at DIY stores like B&Q or online. But, be cautious not to over lubricate as this could cause the hinges to loosen and damaged over time.
Another reason for a draughty window could be that the window isn't aligned with its frame correctly. This could be due to a poorly installed window or by the natural movement of the window over time. You can determine whether this is the case by opening and closing the window and observing any gaps in the corners. If there are any gaps, it's best to get the window replaced as soon as you can to avoid further damage.
There are a number of reasons why uPVC windows are extremely well-liked by homeowners and businesses. They are cost-effective, safe and offer great insulation. They can also increase the value of a home which makes them a good investment. But uPVC windows are vulnerable to damage, which is why it is important to know how to fix them.
Broken or loose hinges
The majority of window problems in upvc result from broken or loose hinges. The hinges can be replaced to fix the problem. You will then be able to open and shut your window in a normal manner. This is a cost-effective simple, quick, and easy repair that will save you money on replacement windows.
Our upvc window are equipped with friction hinges. They are commonly used on side-hung windows however, they can also be used on top-hung windows. They are available in either a 17mm or 13mm stack and come in a pair. If there are gaps in the sash or when the sash is hard to open, they are usually replaced.
When installing the new window hinge made of upvc it is essential to follow the instructions and opening direction. An arrow is located on the hinge. For the window to function properly, the arrow must point in the direction of opening. If you aren't sure which type of hinge to buy, contact us and we'll be more than happy to help.
It is crucial to oil your window hinges on a regular basis. It will let the sash to open and closed freely and stop cracking or warping of the windows made from upvc. You can apply an oil that is light in nature and contains corrosion inhibitors to lubricate the hinges of your upvc window. This should be done at minimum every two years.
This is an excellent way to keep your window in good working order. Also, make sure that the hinges do appear to be loose or damaged. This can be repaired by making small adjustments to your screws. You should not have issues with your windows made of upvc.
It's a simple fix, but you may need to find the correct screw size. It is important to remember that screws can get loose if they are not frequently used, and therefore they must be checked and tightened at least once a year.
Physical Damage
While uPVC windows are durable and long-lasting, they do need some care. Regular maintenance can avoid problems like draughts and water leaks. It also aids in improving comfort and energy efficiency in the home. It is recommended to hire a qualified glazing company to do this type of work, since they have the experience and tools to complete the task correctly. Look for local glaziers on the TrustATrader website, or ask friends and family for recommendations.
One of the most prevalent indications that your uPVC windows require repairs is a crack. This is usually caused by changes in air pressure and can be extremely noticeable. Cracks are usually found around the window's edges. To avoid further damage, it is important to repair your cracked window as soon as you can. This will extend the life of your window and help prevent further damage.
Another issue is when the window sash gets loose. This can create gaps between the window frame and glass and allow cold air into your home, while warm air escapes. This problem can be caused a number of ways, including by children's play, or by harsh weather conditions. If you notice that your sash is loose, you should call in an expert to resolve the problem immediately.
uPVC hinges can make a lot of noise, especially if they're not properly maintained. It is essential to ensure that the hinges are well-lubricated using a suitable product, like WD-40. This will prevent the noise and make your uPVC window quieter. It's also a good idea to include regular cleaning of the uPVC track and wheels into your maintenance schedule.
You should choose a company that has a proven track of record that is insured and licensed for repairs to uPVC windows. You should also find a certified glazier with experience working on uPVC frame and the right tools to complete the task. It is also a good idea to get estimates from a variety of companies, and then evaluate them to find the best deal.